crossfade in sony sound forge audio studio

Actually all processed performed on audio degrades it but noise removals are very destructive. Using more than one noise removal plugin is going to degrade the audio significantly. not spontaneous transients such as clicks and crackle. Noise Reduction is not suited for this as it's best at sustained constant frequency noise such as tape hiss, air conditioner noise, 60 Hz hum etc. Be sure to un-check it before processing or that's all that will be in the file -)Ĭlick and Crackle removal is my tool of choice for vinyl. Check the 'Keep residual' box to hear what will be removed, if you hear some of the program material along with the crackle it's set too aggressive. Noise removal plugins have a point of diminishing returns. Keeping in mind 'less processing is more'. When recording is complete, Delete the spike sometimes produced by the stylus making contact at the start of each side of the LP. Record the whole album as one file, this way the relationship remains intact between tracks as it was originally mastered.

This makes the Plugin Chainer settings work without much tweaking. Set the recording level peaks at about -6 to -3 dB. Rinsing with distilled water would be ideal. Obviously let it dry before placing it back in the jacket. The water provides just enough of a lubricant to reduce static etc.

If you have abused albums (scratches vinyl mold, etc.), literally wash them with dish liquid and an album cleaning brush following the grooves lightly > rinse thoroughly avoiding the label > let most of the water drain off, play and record with it WET. This works well for me.įirst and probably most important is to make sure the LPs are as clean as possible, the stylus, turntable, preamp and connections are in excellent shape of course. Here's my method of converting my vinyl to CD using Sound Forge. Here's a C&P of one of my previous posts on the subject My guess is you are too aggressive with your processing.

Crossfade in sony sound forge audio studio